Players who dealt with CS:GO– often face the problem of an inconvenient standard sight. For some it seems too miniature, while others would like to change the color of the sight to a brighter and more noticeable one. This article is entirely devoted to the question - how to change crosshair in CS:GO, and therefore, if it bothers you, sit down more comfortably!

In the CS:GO settings you can only change scope style and colors. But if you resort to console commands, the possibilities will increase significantly.

Changing the crosshair shape in CS:GO, as well as its color style

The most well-known way to change the appearance of the crosshair, making it more convenient for the player, is through the game options. To get to the settings menu, you need to press the ESC key, then go to the section "Settings and Help", find there "Game Options", then "Interface Settings". In the menu that opens, in the style and color fields of the sight, you must select the desired indicators!

Crosshair style in CS:GO

Second, less popular, but very effective The way is to enter special commands through the game console. Just press the “~” key and enter the required command in the line. For example, the “cl_crosshairstyle” command is responsible for setting the crosshair style in the game. By adding a number from zero to four to the end after it, separated by a space, you can get a new crosshair shape.

Change crosshair color in CS:GO

The color settings of the sight also change according to the same principle, but this time the command will be slightly different, namely “cl_crosshaircolor”. By adding a number from zero to five to the end, we get a new color for the sight.

Add a dot to the CS:GO crosshair

In order to add a dot in the middle of the sight, you need to enter “cl_crosshairdot” into the console, and write zero or one, separated by a space, where zero indicates the absence of a dot, and one indicates the presence.

How to change the scope size in cs go?

If the player is not satisfied with the size of the sight, then this can also be corrected by the console. Just enter the command “cl_crosshairsize”, and after a space at the end enter the value zero, five or ten. Accordingly, the higher the value, the larger the sight.

Conclusion

Now you know, how the crosshair changes in CS:GO, and this means that playing will become even more interesting, and even more convenient - if you approach the issue from a purely aesthetic side!

Counter Strike:Global Offensive allows you to customize your aim. Almost all characteristics are widely configurable: color, line width, outline, transparency, point, size, style, T-shaped.

Developer Console

To customize the crosshair, we will often use the developer console directly in CS:GO itself. You can enable the console in the CS:GO settings menu. To enable the console, go to “settings”, “game options” and in the “enable developer console (~)” tab, select “Yes”.

The main settings of the sight are its style and color. You can configure these two parameters without using the console in the game settings menu. The sight settings are located at the same address as the console: “settings”, “game options”, “interface settings”.

Advanced sight settings

Style

Customizing your scope isn't just limited to style and color. The sight has many parameters and they all start with “cl_crosshair”, namely:
cl_crosshairstyle- customize crosshair style using the console
There are five scope styles in total:
cl_crosshairstyle 0- default (dynamic)
cl_crosshairstyle 1- default (static)
cl_crosshairstyle 2- classic
cl_crosshairstyle 3- classic (dynamic)
cl_crosshairstyle 4- classic (static)
Well-known professional players recommend not using default sights and sights that expand while moving (style 0, 1, 2) due to the fact that they take up a lot of space on the screen and often simply interfere with aiming while moving. Professional players such as 20 years old Natus Vincere And Adil ScreaM Benrlitom22 years old EnVyUs think that style cl_crosshairstyle 3 it is more convenient to use when firing one shot at a time, and cl_crosshairstyle 4 It is more convenient to use when shooting with a spray.
Color
To change the crosshair color in CS:GO, use the parameter cl_crosshaircolor X
There are 6 sight colors in total:
The most popular colors among pro players are green, yellow, blue, and red.

When you customize your scope color, things become more personal. Most professional players believe that any color of the sight has a right to exist. Few people know that the sight may differ on different maps, for example: on the map de_dust2 or de_mirage it is not recommended to use a yellow sight, as it will often blend in with the overall color scheme of the map.
In order to set up a “different color”, you should enter the command cl_crosshaircolor 5 in the console and add each color using commands such as

cl_crosshaircolor_ r

cl_crosshaircolor_b

cl_crosshaircolor_g

There can be a huge number of colors and shades; you can choose these shades by adding a certain amount of color after the values r b g from 0 to 255

Black color	White color	Green color
cl_crosshaircolor_r 0	cl_crosshaircolor_r 255	cl_crosshaircolor_r 125
cl_crosshaircolor_g 0	cl_crosshaircolor_g 255	cl_crosshaircolor_g 255
cl_crosshaircolor_b 0	cl_crosshaircolor_b 255	cl_crosshaircolor_b 0

Circuit

In order to enable the sight stroke, you should enter the command in the console cl_crosshair_drawoutline 1 0 .

With outline	No stroke

Center point

To enable the point, write the commandcl_crosshairdot 1, to turn off - cl_crosshairdot 0

Example of a sight with a dot:

Transparency

The transparency of the sight is adjusted using the commandcl_crosshairalpha X

It is better to either not touch this parameter at all, or use it together with the commandcl_crosshair_drawoutline 1 (sight outline) due to the fact that the transparent sight is less visible in the game, and the outline parameter compensates for its contrast with its outline.

An example of such a sight:

Size

The sight size is calibrated using the command cl_crosshairsize X.

This parameter should be taken with the utmost seriousness, because size is one of the key parameters of the sight.

The size of the scope should be such that the sight is not conspicuous and does not distract your attention, and at the same time it is large enough for you to see it.

Here is an example of a convenient and inconvenient sight:

Comfortable	Inconvenient
cl_crosshairsize 3.5	cl_crosshairsize 8

Distance between slats

The distance between the sight rails is changed using the commandcl_crosshairgap X.This parameter is also one of the key ones in setting up the sight. The sight should be convenient when shooting with a spray at close and medium distances and also convenient for shooting single shots or bursts at long distances. If your distance between the sight rails is too large, then you will not be able to conduct targeted shooting at long distances; if the distance is too small, then it will be inconvenient to aim your head at medium distances.

For example, let's take a configuration with too much distance between the bars and too little:

Line width

The width is adjusted using the commandcl_crosshairthickness X.

The higher the valueX- the greater the width of the sight.

T-sight

In 2017, a T-sight function was added to the sight. In order to enable the sight stroke, you should enter the command in the console cl_crosshair_t 1 , and to turn it off you need to put it at the end of the command 0 .

Sights for professional players:

For example, let's take the sights of some professional players, information about which was taken from the website :

Adil ScreaM Benrlitom22 years old EnVyUs	Aleksandr s1mple Kostyliev20 years old Natus Vincere	Marcelo coldzera David22 years old S.K. Marcelo coldzera David22 years old S.K.
cl_crosshairsize 3	cl_crosshairsize 2	cl_crosshairsize 3
cl_crosshairgap -2	cl_crosshairgap -2	cl_crosshairgap -2
cl_crosshairdot 0	cl_crosshairdot 0	cl_crosshairdot 0
cl_crosshairthickness 1		cl_crosshairthickness 1.15
cl_crosshaircolor 4	cl_crosshaircolor 1	cl_crosshaircolor 1

One of the most important conditions for successfully completing missions in Counter-Strike is the presence of a convenient interface, customized individually for the player. If something is constantly distracting, the likelihood of successfully defeating the enemy is very small. In this article we will talk about such an essential interface element in the game as the sight. Let's look at how you can customize and change it based on your preferences.

How to adjust the crosshair in CS:GO

The developers of CS:GO have provided us with 3 ways to change the sight:

1. Directly in the settings settings in the game itself.
2. Using console commands.
3. Using special cards.

Unfortunately, in the menu of the game itself, the variability of sight settings is very low. Here we can only change the style of the crosshair and its color. To do this you need to go to "Settings", choose "Game Options" and then "Interface Settings".

The most interesting and varied settings can be made using special commands in the console, which we will consider further.

Aim Commands

All commands that change sight parameters are launched from the console. Therefore, first you need to enable this console. Go to “settings”, “parameters” and set the value “Yes” next to the item “Enable developer console”. Now you can proceed directly to setting up the sight itself.

Style

The team is responsible for the sight style cl_crosshairstyle and there are only five of these styles:

• cl_crosshairstyle 0- dynamic standard sight,

cl_crosshairstyle 1 - static standard,

cl_crosshairstyle 2 - classic,

cl_crosshairstyle 3 - dynamic classic,

cl_crosshairstyle 4 - static classic.

These names most likely mean little to beginners, so experiment yourself and choose the style that is most convenient for you. The only thing that can be noted is that professional players do not recommend sights of styles 0, 1 and 2, since they can periodically interfere with aiming while moving. According to players such as ScreaM And s1mple, for single shooting, style 3 is most convenient, and for spray shooting - option 4.

Color

You can change the color using the command cl_crosshaircolor X, where x ranges from 0 to 4 and represents one of five colors, respectively: red, green, yellow, blue, cyan.

Parameter cl_crosshaircolor5 will mean any other color, which can be configured by writing the commands:

cl_crosshaircolor_r

cl_crosshaircolor_g

cl_crosshaircolor_b

These commands reflect the red, green, and blue values ​​in the RGB color model in values ​​from 0 to 255. For example, if we wanted the crosshair color to be white, the commands would look like this:

cl_crosshaircolor5

cl_crosshaircolor_r 255

cl_crosshaircolor_g 255

cl_crosshaircolor_b 255

We can only add that on different maps it would be advisable to use different colors so that the sight does not blend into the surrounding background.

Size

This is one of the most important parameters, since the scope must be large enough to be visible and, at the same time, should not distract your attention. The team is responsible for the size cl_crosshairsize X. Accordingly, X is an indicator of size, which can be written as a whole (for example - cl_crosshairsize4 ), and fractional ( cl_crosshairsize6.5 ).

Circuit

To enable stroke on the sight you need to write a console command cl_crosshair_drawoutline 1. In this case, a thin black border will appear around the scope. To turn off this function, type the command cl_crosshair_drawoutline0 .

Dot in the center of the sight

Although professional gamers recommend against using this option as it can prevent you from aiming accurately at your head, the center dot may be important to some. You can enable this option using the command cl_crosshairdot 1. Likewise, team cl_crosshairdot0 disables the point.

Transparency

Most players do not use this option due to the fact that a transparent sight is harder to see, however, you may also find this function useful. Transparency can be adjusted by command cl_crosshairalpha X. The X range is from 0 to 255. i.e. a value of 0 makes the sight completely invisible, a value of 255 makes it opaque, and, for example, cl_crosshairalpha127 will make a translucent sight.

In addition, there is a command that can enable or disable the transparency mode feature. Those. with the prescribed command cl_crosshairusealpha 0 It will not be possible to set transparency even with the previous command. Respectively, cl_crosshairusealpha 1 re-enables this option.

Line width

The width is formed by the command cl_crosshairthiWithkness X. The higher the X value, the thicker the scope will be. However, when cl_crosshairthiWithkness2 , the sight already looks quite massive. But again, this is a matter of personal preference.

Distance between slats

Another important parameter. If the slats are spaced too far apart, it will be difficult to shoot accurately over a long distance. And at medium distance it will be difficult to hit the enemy in the head if the distance between the slats is too small. This distance is determined by the command cl_crosshairgap X.

T-shaped sight

This is an option in which the top rail of the sight is removed. You can enable this option with the command cl_crosshair_t 1. The command turns off cl_crosshair_t0 .

Hide crosshair

Team cl_croshair 0 completely removes the crosshair display. Accordingly, to turn on the sight, you need to use the command cl_croshair1 . If for some reason your sight suddenly disappears, it is recommended to first check the meaning of this command.

There are several other commands used by professional players that allow you to adjust the transparency of the sight while jumping, change the distance between the bars when running, etc. You can easily find them on the Internet.

How to change the sight using special cards

Another way to change crosshair settings is to use the crashz' Crosshair Generator map from Valve's workshop. The map was created precisely in order to achieve the desired results without using console commands. In order to access the map, you need:

1. Launch Steam and go to the Workshop.
2. In the search for a Workshop, type crashz’ Crosshair, click on the lens icon and add it to yours.
3. Launch CS:GO and select a game with bots.
4. Switch "Standard" to "From Workshop" at the top of the window.
5. Select the crashz’ Crosshair card.
6. Accept and run as normal.

Everything else is simple. You are on the map and in front of you are panels with various sight parameters. We choose any property we like and just shoot at it. Thus, we shape the appearance of our sight. In the same room you can practice and test your sight on bots.

An interesting “bunion” from the developers is a panel with sights of famous players. You can go to the team stand, select the desired player and press “fire”. As a result, you will have this player's sight settings. If after this you need to change any of the parameters, return to the property panels.

Thus, there are quite a lot of options for individually customizing the sight. Choose the one most convenient for you, create your own sight and improve your gaming skills!

The classic sight in CS GO can hardly be called convenient for every player, since it is quite large in size. Therefore, to adjust the sight from large to small, you just need to enter the necessary console commands.

Usually size plays a very serious role during the game. Undoubtedly, reducing the size of the scope will increase shooting accuracy and the likelihood of hitting the target.

1. The target appears denser in the sight field;
2. Makes it easier to aim at enemies;
3. More accurate shooting.

Disadvantages:

1. Poor sight visibility in some areas of the map;
2. Problem with aiming the weapon at the target.

But if you play with these settings for a long time, you can quite get used to how it is in CS GO.

Also, do not forget to study, who, like no one else, know the most effective settings for this element of the game interface.

In addition to setting up the sight, sometimes you have to look for information; it is recommended to follow the link in which you will have the opportunity to familiarize yourself with this information. The article is recommended reading. The information is useful.

The advantage of console commands is that you can immediately test each type of sight in battle in order to understand whether it suits you or not. When setting up a sight in CS:GO, you cannot do without console commands. By default, in the settings you can only select the color and style of the sight. But through the console or the game config you can change the sight as you like. This is what we dedicate this article to.

It is worth noting that the sight is an individual setting. You can use the sights of experienced players, but it is better to go through and test many options for setting up the sight in CS:GO to understand which one is right for you. I personally tested all the sights for players and none of them suited me 100%. But nevertheless, at the end of the article we will provide the settings of the sights of experienced players (Butcher, Hatton, GeT_RiGhT, f0rest, friberg, Xizt, Fifflaren, cheatbanned, stewie2k sight, etc.). Maybe their scope is right for you.

Crosshair adjustment in CS:GO: best VIDEO

Crosshair style and color in CS:GO

The standard sight settings are primitive and quite limited, representing only basic sight configurations. The sight settings menu can be found in Help->Settings ->Game Options ->Sight. Here you can set the style (classic or default), appearance (dynamic or static), and the color of the sight.

ESC->Help-Settings->Game Options->Aim

If these settings are not enough for you, then open the developer console by clicking on the tilde, and using console commands set the desired type of sight.

The crosshair style in CS:GO is set by the command cl_crosshairstyle (0, 1, 2, 3, 4):

• 0 – cs:go dynamic, stylized crosshair, which is enabled by default. For some, this is what is most convenient.
• 1 – cs:go static – the same thing, only motionless when shooting.
• cl_crosshairstyle 2 – cs 1.6.
• cl_crosshairstyle 3 – cs 1.6 dynamic.
• cl_crosshairstyle 4 – cs 1.6 static.

What does a sight look like with and without a dot:

Crosshair outline in CS:GO

Team cl_crosshair_drawoutline is responsible for the outline of the sight. With parameters 0, 1 - you can either turn the stroke on or off.

• cl_crosshair_drawoutline 0 - there is a stroke
• cl_crosshair_drawoutline 1 - no outline

If stroke (contour) is enabled, another command becomes available - cl_ crosshair_outlinethickness.

An example of the sight outline in the photo:

No stroke

Let's move on to the thickness of the sight contour (stroke), it is set by the command - cl_crosshair_outlinethickness and parameters from 0 to 3, where 0 is the thinnest crosshair outline, and 3 is the thickest.

• cl_crosshair_outlinethickness 0 - thin outline, we do not recommend using it, blends in with textures
• cl_crosshair_outlinethickness 1 - the same, rarely used, not visible on many maps
• cl_crosshair_outlinethickness 2 - suitable for most
• cl_crosshair_outlinethickness 3 - similar

You can also use half values, for example 0.5, 1.5.

• cl_crosshairthickness 0.5
• cl_crosshairthickness 1.5
• cl_crosshairthickness 2.5

Crosshair size in CS:GO

Another important parameter is the size of the scope. To change the size (reduce) the sight, use the command cl_crosshairsize. Valid values ​​are from 0 to 100, where 0 is a small cs go sight, 10 is a large sight, etc.

In short, to get a small crosshair, just set the command - cl_crosshairsize 1. An example is in the photo below:

cl_crosshairsize 1

cl_crosshairsize 3

Distance between sight lines

The cl_crosshairgap command is responsible for the distance between the crosshair lines. Moreover, this is a command where the values ​​can be negative. If you need to narrow the scope as much as possible, use a value of -5. Popular commands:

• cl_crosshairgap -5
• cl_crosshairgap 0
• cl_crosshairgap 5

Examples of team work:

cl_crosshairgap 5

cl_crosshairgap 0

cl_crosshairgap -5

Sight transparency in CS GO

A little about transparency. To set the transparency of the sight, use the command cl_crosshairalpha. Available values ​​are from 0 to 255, most often 3 variations are used (0, 127, 255). The lower the value, the more transparent the sight. There are 3 main commands that are used to adjust transparency:

• cl_crosshairalpha 0 – transparent sight; however, its meaning will not be visible at all.
• cl_crosshairalpha 127 – set the transparency to 50%.
• cl_crosshairalpha 255 – this parameter is often used by pro players; the crosshair is not transparent and is clearly visible on any maps.

cl_crosshairalpha 255

cl_crosshairalpha 127

If you prefer an opaque sight, all you need to do is use the command cl_crosshairusealpha and turn off transparency, with the command cl_crosshairalpha - will not be taken into account:

• cl_crosshairusealpha 0 - disable transparency
• cl_crosshairusealpha 1 - enable transparency

How to hide or show the crosshair in CS:GO

Logged into the game and don’t see the crosshair? A fairly common problem is when the scope disappears for no reason. To enable display, write the command crosshair 1, the sight should appear. If you register crosshair 0 – the sight will disappear.